RF MAX RFM-SWPOE8 smart switch PoE 8-port

Description

Switch PoE is unique ethernet 10/100Mb switch with power supply in passive mode (not 802.3af).
Most characteristic is that this device not have own power supply, but use power supported by user. This allow use wide range of supply voltage and kind use buffered power for not interrupted supply. Other unique feature is very compact housing, only 34mm depth and 1U high. This allow to use this switch in very small cable boxes.

Features:

• management by WWW or SNMP v2.

• firmware upgrade by special application

• read data in real time without refresh the page

• ON/OFF power to eight passive POE ports directly from a web page or SNMP

• Watchdog IP on all ports

• monitoring of additional equipment such as power buffer

• environment temperature

• voltage measurement: resolution, accuracy – + 0.1 V

• current measurement: 10mA resolution, accuracy +-20mA

• date and time from NTP or manual

• email alert when Watchdog activation

• automatic sending of SNMP TRAP (VCC, temperature, INPD)

• supported protocols: HTTP, SNMP, SMTP, NTP, ICMP, DNS, DHCP.

• 8 ports 100/10Mbit

• cutting off power on the PoE port when 2A current is exceeded. 

 

• remote control and manage device (Lan Controller)

 

Technical Spesifications:

• power supply voltage: 6-56V (for suplied power more than 5W suggested min 12V, for longer cables as 20M suggested 24V or more).

• current consumption at one POE port, max 2A (electronic recommended max 1,5 A).

• total power on all ports should not exceed 8A.

• power consumption of the switch: one active link about 0.6W

• protection against reverse polarity: YES

• work temperature: -20 do +85 st. C

• housing sizes (without holders) 168x42x34mm , with holders 234x42x34mm
  housing high – 1U